Static Control Wrist Strap - Alcatel-Lucent 1665 Installation Manual

Laser safety and classifications and Electrostatic
Discharge (ESD) considerations
for connection of wrist straps is located at the upper left-hand corner of each assembly and
is labeled. When grounding jacks are not provided, an alligator clip adapter enables
connection to bay frame ground.
Figure A-2 Static control wrist strap
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL INSTRUCTIONS
When installing, operating, or maintaining this equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock, and injury to persons,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on this product.
3. This product should be only operated from the type of power sources indicated on the
marking label.
4. Connect this product only to the type of power sources recommended by Lucent
Technologies.
5. This equipment is suitable for mounting on a concrete or other noncombustible surface
only.
6. For information on proper mounting instructions, consult the Installation Manual.
7. Install only equipment identified in this Installation Manual. Use of other equipment
may result in improper connection of circuitry leading to fire or injury to persons.
............................................................................................................................................................................................................................................................
A - 6
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying this product.
Electrostatic Discharge ESD considerations
TO
GROUND
CONNECTION
Issue 1, November 2007
365-372-304R7.1