............................................................................................................................................................................................................................................................

Description

If a shelf is added above existing non-1665 DMX equipment, one heat baffle (848862181)

must be installed between the shelf and the existing equipment.

Determine the mounting configuration for the heat baffle:

Type of bay frame (23-inch or 19-inch wide)

•

Mounting position (front or rear)

•

Position in bay (below shelf mounted above non-DMX heat generating equipment).

•

Important!

mounting to the rear of a 23-inch wide network bay frame.

The heat baffle mounting brackets may have to be repositioned and remounted, depending

on the frame type and mounting position (front or rear).

If necessary, reposition the heat baffle mounting brackets to match the position of the 1665

DMX High-Capacity shelf.

Refer to

orientation of the heat baffle.

1 - 1 4

The heat baffle is shipped with the mounting brackets positioned for

Figure 1-5, Heat baffle position (p. 1-15)

Heat baffle installation

for the mounting position and

365-372-304R7.1

Issue 1, November 2007

Table of Contents

Heat Baffle Installation - Alcatel-Lucent 1665 Installation Manual

Heat baffle installation

Related Manuals for Alcatel-Lucent 1665

Related Content for Alcatel-Lucent 1665

Table of Contents