Alcatel-Lucent 1665 Installation Manual page 323

Fiber cleaning
........................................................................................................................................................................................................................
Using the appropriate CLETOP stick cleaner (2.5 mm for SC, ST, and FC connectors, 1.25
1
mm for LC connectors) dampen the stick cleaner with Ethyl alcohol using the alcohol
wipe. Insert the stick cleaner into the adapter rotating the stick 360 degrees while
inserting. Push/rotate stick until the stick cleaner makes contact with the connector. Apply
slight pressure upon contact and rotate stick 360 degrees at least three (3) times.
........................................................................................................................................................................................................................
Remove the stick cleaner rotating it upon removal.
2
........................................................................................................................................................................................................................
Using a dry CLETOP stick cleaner of appropriate diameter, repeat the above cleaning
3
procedure. This procedure will clean the side walls of the adapter and the endface of the
circuit pack connector.
........................................................................................................................................................................................................................
Gently insert the Video Fiber Scope probe into the port until the fiber ferrule comes into
4
view.
........................................................................................................................................................................................................................
Verify that the fiber ferrule is clean. Repeat
5
meet the requirements specified in
E O
N D
........................................................................................................................................................
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
S
F T E P S
Step 1 through
"Connector inspection" (p.
Cleaning/inspecting optical connectors
Step 3 if the fiber does not
B-9).
B - 1 1