1665 Dmx High-Capacity Shelf; Cable Requirements And Options - Alcatel-Lucent 1665 Installation Manual

Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
Table 1-1
Notes:
1. One -48VA and -48VB main power feeder is required per shelf. Many varieties of 45-amp
connector cables are available as well.
2. One Fan Cable (848839551) is shipped with each
3. One CIT Cable Assembly or Crossover LAN cable is required for PC interface with the
DMX High-Capacity shelf
4. Two DS1 Cable Assemblies are required for each Function Unit equipped for 28 DS1 service
(LNW6, LNW7). Four DS1 Cable Assemblies are required for each Function Unit equipped
for 56 DS1 service (LNW8). Each DS1 Cable Assembly consists of two separate cable
assemblies, both containing 28 pairs of 24 gauge cable. One cable is for input and the other
cable is for output.
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007

Cable requirements and options

Cable assembly description
Power
Fan
CIT or Cross over LAN Cable
DS1
DS3
TMUX
10/100BaseT Ethernet
Office Alarm
Office Alarm Mult
Miscellaneous Discrete
LAN 10BaseT (Crossover)
LAN 10BaseT (Straight Through)
Sync Timing
Modem
(not included with equipment).
Required See note
Yes 1
Yes 2
Yes 3, 10
Optional 4
Optional 5
Optional 6
Optional 7
Optional 8
Optional 8
Optional 9
Optional 10
Optional 10
Optional 11
Optional 12

1665 DMX High-Capacity shelf

Planning
.
1665
1 - 5