Software download and circuit pack installation
Provision/Enable/disable the 1665 DMX as a TL1 TCP/IP GNE
............................................................................................................................................................................................................................................................
Purpose
Use this task to provision, enable or disable the 1665 DMX as a TL1 TCP/IP GNE.
Required equipment
The following equipment is required:
Personal Computer (PC) with WaveStar CIT
•
Wrist Strap
•
Safety precautions
To assure both personal safety and the proper functioning of the 1665 DMX, it is
imperative to review and understand these warnings and precautions prior to performing
this task.
Use a static ground wrist strap whenever handling circuit packs or working on a system
to prevent electrostatic discharge damage to sensitive components.
Before you begin
Prior to performing this task, you must:
Obtain the work instructions for this task.
•
Complete the
•
enable TCP/IP for the selected LAN port.
Complete the
•
Know which LAN port is being provisioned.
•
Know the IP addresses, host names and host types for the gateway hosts which will be
•
allowed access to the 1665 DMX TL1 TCP/IP GNE.
Be able to log in to a 1665 DMX WaveStar
•
the WaveStar
........................................................................................................................................................................
3 - 1 8
CAUTION
ESD hazard
Circuit pack firmware version verification
"Provision/enable/disable TCP/IP on an IAO LAN port" (p.
®
CIT.
Provision/Enable/disable the 1665 DMX as a TL1 TCP/IP
®
software installed
procedure to provision and
®
CIT and be familiar with the functions of
GNE
3-14).
365-372-304R7.1
Issue 1, November 2007