Power Connector Mounting Positions - Alcatel-Lucent 1665 Installation Manual

Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
Figure 1-7 Power connector mounting positions
Important!
power cabling for four 1665 DMX High-Capacity shelf shelves in a standard bay
frame. The side view shows the power connectors for shelves 3 and 1 mounted closest
to the rear of the shelves (default position) with the cabling for shelf 1 bending away
from the power connector on shelf 3 and running over it until the power cables exit the
bay. The power connectors for shelves 4 and 2 are mounted in the alternate position on
the shelf and the power cables routed in the same manner.
............................................................................................................................................................................................................................................................
365-372-304R7.1
Issue 1, November 2007
RIGHT SIDE
Figure 1-8, "Alternating power cable routing" (p. 1-20)
Power cable and cable bracket installation
POWER CONNECTOR
MOUNTING POSITIONS
shows the typical
1 - 1 9