Use Of Wavestar ® Cit Software - Alcatel-Lucent 1665 Installation Manual

Software download and circuit pack installation
Result:
................................................................................................................................................
Under
6
................................................................................................................................................
Under
7
down list.
................................................................................................................................................
Under Connection Type, click on the drop-down menu arrow and choose Serial or OSI,
8
depending on the type of connection you are using.
Important!
Otherwise, you may experience login problems. To assign an IP address, start the DOS
prompt on the computer, and type the command ipconfig/all. The command will show
an IP address line. If there is no address line or 0.0.0.0 for an IP address, then you must
assign an IP address in the NIC card of the computer.
........................................................................................................................................................................
3 - 1 0
The following is displayed.
, enter
NE Name LT-DMX
click on the drop-down menu arrow and choose DMX from the drop-
NE Type
An IP address must be assigned to the NIC card on the PC or laptop.
.
®
Use of WaveStar CIT software
365-372-304R7.1
Issue 1, November 2007