Alcatel-Lucent 1665 Installation Manual page 48

Equipment and cable installation for 1665 Data Multiplexer
(1665 DMX)
Otherwise, ensure that power connector is in the following position:
........................................................................................................................................................................................................................
There are two mounting positions on each side of the 1665 DMX High-Capacity shelf
3
chassis as shown in
recommended that if multiple shelves are being installed in a frame, the power connector
positions be alternated as shown in
(p. 1-20).
Determine if the power connector needs to be moved to the other mounting position. If so,
move the power connector to the other mounting position now.
............................................................................................................................................................................................................................................................
1 - 1 8
Figure 1-7, "Power connector mounting positions" (p.
CAUTION
Use provided hardware only to adjust the position of the power
connector housing.
Power cable and cable bracket installation
Figure 1-8, "Alternating power cable routing"
1-19). It is
365-372-304R7.1
Issue 1, November 2007