Fixed Problems For 3600 Mainstreet Multishelf Systems; Fixed Problems For 3600+ Mainstreet Systems; Notes And Restrictions; Installation Notes - Alcatel-Lucent 3600 Release Notice

Mainstreet series

Hide thumbs Also See for 3600:

Table of Contents

Alcatel-Lucent

3.2 Fixed problems for 3600 MainStreet multishelf systems

None

None

The following installation notes and restrictions apply to the 3600 and 3600+ MainStreet

systems. Note that some of these notes and restrictions are not specific to this Release 9.0 load

but also apply to previous releases of the 3600 and 3600+ MainStreet software.

The 3600+ MainStreet Timing card must always be installed before the 3600+ MainStreet

Control card; otherwise, the Control card will not operate properly.

When using Octal E1 or Octal T1 card redundancy on the 3600+ MainStreet node, ensure

that the paired slots are adjacent to each other with the first card in the lower-numbered

slot (for example, slots 1 and 2 are paired, not 2 and 3).

Upgrading the 3600+ MainStreet node from Release 7.1 and earlier releases requires

installation of the MEM2 module, as this module is needed for Release 9.0 operation. This

is not an issue when upgrading from Release 8.0, as Release 8.0 also requires the

3600+ MainStreet to have an MEM2 module installed.

Upgrades from previous releases running on the DMM2 (3600 MainStreet and 3600

MainStreet multishelf systems) are supported.

Refer to the following documents:

01NUP0005

39NUP0003

Page 6

Last revised: 1 December 2009

3600 MainStreet Installation and Upgrade Procedure

3600+ MainStreet Installation and Upgrade Procedure

01RN0031_H0-30

Table of Contents

3600+