Remote Maintenance, Management And Control - Alcatel-Lucent 1643 AMS Applications And Planning Manual

Features

Remote maintenance, management and control

...................................................................................................................................................................................................................................
First maintenance tier
The maintenance procedures of the 1643 Access Multiplexer AM / 1643 Access
Multiplexer Small AMS systems are built on two levels of system information and
control. The first maintenance tier consists of the LEDs on the equipment. There are
two LEDs on the front of the 1643 Access Multiplexer AM / 1643 Access Multiplexer
Small AMS. Additionally there are LEDs on option cards and near to the SFPs for
1643 AMS. The LEDs indicated basic alarms or basic operation states.
Second maintenance tier
The second maintenance tier employs the Alcatel-Lucent network management system.
Detailed information and system control are obtained by using the ITM-CIT (Craft
Interface Terminal), which supports provisioning, maintenance and configuration on a
local basis. A similar facility (via a Q-LAN connection or via the DCC channels) is
remotely available on the element manager, the Lucent OMS, which provides a
centralized maintenance view and supports maintenance activities from a central
location.
1643 Access Multiplexer AM / 1643 Access Multiplexer Small AMS support SNMP
management via the Q-LAN interface.
Lucent Optical Management System
At network level (customer's network management center), Alcatel-Lucent' Lucent
Optical Management System (OMS) performs all the tasks that are necessary to
supervise, operate, control and maintain an SDH network with the 1643 Access
Multiplexer AM / 1643 Access Multiplexer Small AMS.
SNMP
1643 Access Multiplexer AM / 1643 Access Multiplexer Small AMS support SNMP
access via its Q-LAN interface. The protocol version SMNPv2c is supported according
to FRC 2578, RFC 2579, RFC 2580, RFC 3416, RFC 3417, RFC 3584, and RFC
2863.
The managed information is kept in Management Information Bases (MIBs). The
system supports a subset of the SNMPv2 MIB (acc. to RFC 3418) and the interfaces
group MIB (acc. to RFC 2863). The system supports the inventory retrieval and link
supervision aspects of the MIBs.
The following SNMP traps are supported:
• snmpTraps.warmStart acc. to SNMPv2 MIB (RFC3418)
• snmpTraps.coldStart acc. to SNMPv2 MIB (RFC3418)
• snmpTraps.linkDown acc. to The Interface Group MIB (RFC2863)
• snmpTraps.linkUp acc. to The Interface Group MIB (RFC2863)
...................................................................................................................................................................................................................................
2-24 Alcatel-Lucent - Proprietary
See notice on first page
365-312-801R7.2
Issue 3, May 2007