Ne Date And Time - Alcatel-Lucent 1643 AMS Installation Manual

ITM-CIT installation and NE provisioning

NE date and time

...................................................................................................................................................................................................................................
Overview
This section provides a procedure for setting or changing the NE date and time.
Before you begin
The current date and time information must be known. If there is an association with
OMS, then the date and time are automatically set when the association is established
and will be repeated every 24 hours (at night).
Procedure
Complete the following steps to set the NE date and time:
...................................................................................................................................................................................................
Select
1
Result:
...................................................................................................................................................................................................
Click
2
Result:
...................................................................................................................................................................................................
Select the desired Edit Mode. Fill in the date and time (when the manual setting is
3
chosen) and click
Result:
E
N D
...................................................................................................................................................................................................
Parameters
Date
This field is used to set the date when the manual setting edit mode is chosen.
Edit mode
There are two edit modes which provide a choice of methods by which the date and
time can be changed. The possible values are described in the table below.
Edit mode
Sync to CIT time
Manual set
...................................................................................................................................................................................................................................
365-312-802R7.2
Issue 4, June 2007
Management → Time
The NE Date and Time window appears.
Edit
.
The Edit Date and Time window appears.
OK
.
The Edit Date and Time window disappears.
O F S T E P S
Description
The date and time are set automatically by using the local time
and date from the CIT (PC). This information is sent to the NE
and the time and date are set.
The date and time must be set manually.
Alcatel-Lucent - Proprietary
in the main menu.
See notice on first page
6-15