Chapter 5 Appendix; Specification; Dial Setting - RGBlink FLEXMINI User Manual

Chapter 5 Appendix

5.1 Specification

HDMI Input
Module
Input SDI Input
Module Module
4K60 Input
Module
HDMI Output
Module
Output SDI Output
Module Module
4K60 Output
Module

5.2 Dial Setting

1. The module above can be used in all three model:FLEX 9(MINI),FLEX 18(MINI)and FLEX 36(MINI).SDI,fiber and
HDMI input/output module can be set via dial switch.
Input Module
Resolution Set
D3 D4 D5
0 0 0
0 0 1
0 1 0
0 1 1
1 0 0
1 0 1
1 1 0
1 1 1
Audio and Image
D6 Version
1 1 Display image normally
© Xiamen RGBlink Science & Technology Co., Ltd.
| support@rgblink.com | www.rgblink.com
Ph: +86 592 5771197
Description D7
1024*768 1
1360*768 1
1920*1200 1
720P/60 1
No definition 0
No definition When ON=0,digital =1
1080P/50
1080P/60
Description
Support 4K30Hz input signal,with audio
embedded.
Support 3G/HD/SD-SDI input signal,and 1
loop,with audio embedded.
Support 4K60 4:4:4 input signal,bandwidth
up to 18G, support HDCP2.2 protocol,and
compatible with common resolution.
Support HDMI output,with audio
embedded.
Support dual 3G/HD/SD-SDI output signal
Support 4K60 4:4:4 output signal,
bandwidth up to 18G,support HDCP2.2 and
1 analog audio output
Signal Selection
D1 D2 Description
0 0 CVBS input
0 1 YPBPR input
1 0 VGA input
1 1 DVI input
X X D7=0,auto-d
etection of
inputs
IR Switch
D8 Description
0 OFF
1 ON
eg:
1. If select DVI
input,dial D7 =0,and
then D1,D2=11.
2. If select 3.5mm
audio input,dial D6=0
24