Show Upgrade Error After Upgrade Mcu Program; Software Upgrade Failed - RGBlink VSP 628PRO User Manual

6.1.9 Show Upgrade Error after Upgrade MCU Program

Frequently
Show Upgrade Error after Upgrade MCU Program
Asked Question
Upgrade the Program Again
VSP 628PRO only needs to upgrade the package after upgrade the
program, and only for some old version devices need to upgrade the
MCU program. Once upgrade the MCU program, the OLED panel will
Troubleshooting show writing tip during upgrading. Except it, the others don't need to
upgrade the MCU program.
If user upgrade the MCU program first, the device will can't be started.
User need to contact our customer service for the version 2.13
package and upgrade to the latest package.

6.1.10 Software Upgrade Failed

Frequently
Software Upgrade Failed
Asked Question
Processing Bar Stops at About 90%
If processing bar stops at about 90% during _xx_Packge_xx.bin,
please use _xx_MCU_xx.bin. After that, no need to upgrade
_xx_Packge_xx.bin. (Please disconnect the input and output before
upgrade).
Troubleshooting
Processing Bar Stops at About 30%
If processing bar stops at about 30% during _xx_Packge_xx.bin,
please use _xx_MCU_xx.bin. After upgrade _xx_MCU_xx.bin,
re-upgrade _xx_Packge_xx.bin. (Please disconnect the input and
output before upgrade).
VSP 628PRO User Manual 66