Custom Logo - RGBlink M2 User Manual

Note:
Either EFFECT or DSK can be edited for each scene. They cannot appear at the same time.

6.3.3 Custom Logo

Select "Logo" in "Toolbox", it will enter to the window as follows:
First of all, user should create a graphic image with Microsoft Paint. There are some rules to
follow in creating an image:
The background of the image should be white by default.

It should be 24 bit BMP and the dimension should be not more than 256×128.

Select the BMP file and upload. Click TOOLBOX and select LOGO.
There are rules to follow when saving the file:
The file number should be 0~50 in order. Interruption is not permitted.

The file should be named as M2\LOGO.

The format of USB should be FAT 32.

- Press [LOGO] button in the Functions area.
- Select "Load From U DISK".
- User can set the position and dimension of the LOGO.
Chapter 6: Appendix
68