Removing The Fork Protector; Installing The Fork Protector; Removing The Fork Legs - Husqvarna FC 250 Heritage 2023 Owner's Manual

11.5

Removing the fork protector

11.6

Installing the fork protector

11.7

Removing the fork legs

SERVICE WORK ON THE CHASSIS 11
–
Remove screws
–
Remove screws
–
Remove screws
A01213-10
–
Position the fork protector on left fork leg. Mount and tighten
1
screws .
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
2
screws .
–
Position the fork protector on the right fork leg. Mount and
tighten screws
A01213-11
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
A01067-10
1
and take off the clamp.
2
and take off the left fork protector.
3
and take off the right fork protector.
M6 10 Nm (7.4 lbf ft)
3
.
M6 10 Nm (7.4 lbf ft)
p. 49)
( p. 96)
1
and take off the clamp.
2
and take off the brake caliper.
51