D_boot_cons.doc 200 Thu Jul 11 10:49:34 1996
Table 27
The Boot Console Interface
Displaying and Setting Paths
The paths are displayed in Mnemonic Style Notation, as shown in Table 27.
Mnemonic Style Notation
I/O Type
Built-in FWSCSI
fwsci.scsi_address.logical_unit_number
Built-in SCSI
sescsi.scsi_address.logical_unit_number
Optional
gscn.scsi_address.logical_unit_number
Built-in LAN
lan.server_address.init_timeout.io_timeout
To display the current setting for a particular system path, follow the direc-
tions in "Accessing the Boot Console Interface" earlier in this appendix, and
then type the following at the prompt:
Main Menu: Enter command >
where path_type is one of the path types listed in Table 26.
For example, to get the path to the primary boot device, follow the directions
in "Accessing the Boot Console Interface" earlier in this chapter, and then
type the following at the prompt:
Main Menu: Enter command >
To set a system path to a new value, follow the directions in "Accessing the
Boot Console Interface" earlier in this chapter, and then type the following
at the prompt:
Main Menu: Enter command >
where path_type is one of the path types listed in Table 26 and path is the
specification of the path in Mnemonic Style Notation (as described in Table
27). For example, to set the primary boot path to a scsi disk with an ID of
6.0, follow the directions in "Accessing the Boot Console Interface" earlier
in this appendix, and then type the following at the prompt:
Main Menu: Enter command >
200
Specification Format
path path_type
path primary
path path_type path
path pri sescsi.6.0