Displaying The Current Monitor Configuration - HP 2240 Owner's Manual

Displaying the Current Monitor Configuration

D-18
To display the current monitor configuration for your system from the
Configuration Menu of the boot console interface, follow the direc-
tions in "Accessing the Boot Console Interface" earlier in this appen-
dix. Once you are in the Boot Console Interface Main Menu, enter:
Main Menu: Enter command > configuration
This places you in the Configuration Menu. From here, enter:
Configuration Menu: Enter command > monitor
The screen displays a list of the current graphics adapters and there
monitor types configured for your workstation.
MONITOR INFORMATION
Path Slot Head
––––––––– –––– –––– –––––– ––––––––––– –––– ––––– –––––
GRAPHICS(1) 1
Configuration Menu: Enter command >
In this example, only the graphics adapter(located in slot 1) graph-
ics(1) is configured. The monitor type for graphics(1) is set to type
12, which is a 1280 by 1024 monitor that uses a frequency of 72 Hz.
HPA Resolution
1 f8000000 1280x1024
Freq Type Class
72Hz 12