Displaying Pim Information - HP Visualize c100 Service Handbook

Boot Console Interface Model C160L/160/180/200/240/360

Displaying PIM Information

Displaying PIM Information
The pim command allows you to display the most
recent PIM information for the specified fault type. To
display PIM information for a specific fault, from the
Service Menu, type the following at the service menu
prompt:
pim processor_number
You can use pim in the following ways:
pim - gives all fault types
pim 0 - HPMC information on processor
pim 0 fault_type - fault type information on
processor
244