Displaying System Information; Displaying Pim Information - HP j6700 - Workstation Service Handbook

Displaying System Information

The all command allows you to display the system's processor revision and speed, cache
size, memory size, flag settings, and the boot and console paths. To display system
information, from the Information Menu type the following:
Information Menu: Enter command > all [Enter]
This information is paged to allow you to view it as necessary, unless the ScRoll command
has been used to disable scrolling.

Displaying PIM Information

The pim command allows you to display the most recent PIM information for the specified
fault type. To display PIM information for a specific fault, from the Service Menu, type the
following:
Service Menu: Enter command > pim processor_number fault_type [Enter]
Chapter 5
Boot Console Handler
Displaying System Information
127