Storage Tray Assembly; Removing The Storage Tray Assembly - HP Visualize c100 Service Handbook

Storage Tray Assembly

Perform the following steps to remove the storage tray
assembly from the system unit:
1 Remove the storage tray retaining screw, as shown in
Figure 30

Removing the Storage Tray Assembly

2 If installed, remove any locking device from the security
3 Place your fingertips in the finger groove on the bottom
4 Slide the storage tray completely out of the system unit.
Figure 30.
Retaining Screw
loop on the rear of the system unit.
of the storage tray bezel and pull straight, as shown in
Figure 30.
Field Replaceable Units
FRU Removal and Replacement
117