Setting The Monitor Type - HP Visualize c100 Service Handbook

Boot Console Interface Model C100/110
Displaying and Setting the Monitor Type

Setting the Monitor Type

Using the list in the example above, you can set the
monitor type for graphics slot3 by typing the follow-
ing:
You can exit at this point by entering x, and
NOTICE:
the monitor type will not be changed.
The screen displays the choice of supported monitors,
similar to the following. Follow the directions in the
screen prompts and enter the monitor type you want to
configure (in this example, number).
MONITOR INFORMATION
Type
----
1
2
3
4
5
6
7
8
9
10
11
12
13
Enter monitor type selection from list above (or 'x' to exit): 2
2
Press <y> to save monitor type or <x> to exit monitor selection: y
194
monitor graphics3
ResolutionFrequency
-------------------
1280x1024 75Hz
1024x768 75Hz
1024x768 70Hz
1024x768 75Hz Flat Panel
1280x1024 60Hz
1024X768 60Hz
640X480 60Hz
1280X1024 75Hz VESA
1024X768 75Hz VESA
800X600 75Hz VESA
640X480 75Hz VESA
1280X1024 75HZ GrayScale
1280X1024 50HZ
1024x768 75Hz