Installing Cache Modules - HP Visualize c100 Service Handbook

Installing Cache Modules

Before installing cache modules, remove the Main
Tray Assembly from the system unit.
You must install two cache modules.
Perform the following steps to install cache
modules:
1 Locate the cache connectors on the CPU board, as shown
2 To install a cache module, close the ejector tabs on each
Figure 44

Installing Cache Modules

in the figure in the previous section.
side of the cache connector. This lowers the force needed
to seat the cache board.
Line the cache module up with the guides, as shown in
Figure 44. Make sure that the notched end of the cache
module is to the left, as shown in Figure 44.
Field Replaceable Units
FRU Removal and Replacement
131