HP Visualize c100 Service Handbook page 260

Boot Console Interface Model C160L/160/180/200/240/360
Displaying and Setting the Monitor Type
To set the monitor type for graphics(0) to monitor type
2 you would enter the following;
Configuration Menu: Enter command >
Configuration Menu: Enter command > monitor graphics(0) 2
This will take effect on the next reboot.
MONITOR INFORMATION
Path Slot Head
----------- ---- ---- --------
GRAPHICS(0) 0 1 f8000000
The boot console displays a message that tells you that
your new monitor selection will take affect the next
time you reboot your system.
The boot console also displays the new monitor infor-
mation.
Trying to change the monitor type to a number not
listed for that graphics device fails and gives you the
following warning message:
Value of monitor type n out of range (n - nn)
Trying to change the monitor type on an empty slot
fails and gives you the following warning message:
No such graphics card.
232
monitor graphics(0) 2
HPA Resolution Freq Type
---------- ---- ----
1280x1024 75Hz
Class
-----
2