Displaying Pim Information - HP Visualize c100 Service Handbook

Boot Console Interface Model C100/110

Displaying PIM Information

Displaying PIM Information
The pim command allows you to display the most
recent PIM information for the specified fault type. To
display PIM information or a specific fault from the
Service Menu, type the following at the prompt:
You can use pim in the following ways:
The C Class workstations have only processor
NOTICE:
number 0.
206
pim processor_number
pim - gives all fault type information
pim 0 - HPMC information
pim 0 fault_type - information on fault type