Displaying Pim Information - HP Visualize c3650 Supplementary Manual

displaying pim information

The pim command allows you to display the most recent PIM information for the specified
fault type. To display PIM information for a specific fault, from the Service Menu, type the
following at the prompt and press
Service Menu: Enter command > pim processor_number fault_type
You can use pim in the following ways:
pim - No arguments for the pim command returns the HPMC information for processor 0
pim 0 - HPMC information on processor 0
pim 0 fault_type - fault type information on processor 0
where fault_type is HPMC (high priority machine check), LPMC (low priority machine check),
or TOC (transfer of control).
Chapter 6
:
Enter
boot console handler
displaying pim information
183