Models C160 And C180; Graphics Paths - HP Visualize c100 Service Handbook

Configuration
Graphics Configurations

Models C160 and C180

This subsection describes the graphics configuration
rules and restrictions for the Models C160 and C180.
Note that a C200 upgraded from a C160/C180 will
have these same rules and restrictions.

Graphics Paths

graphics(0) is the built-in 8-plane graphics adapter.
graphics(1) through graphics(4) are graphics adapters
installed in option slots 1 through 4.
When a dual display graphics adapter (an adapter
which has two video output connectors) is installed,
the video connector on the left (when looking at the
system from the rear) is graphics(NA) and the video
connector on the right is graphics(NB). Where N is the
slot number in which the graphics adapter is installed.
A and B denote the two video output connectors on the
dual display adapter.
For example, a Dual Visualize Enhanced Graphics
Card (A4451A) installed in option slot 3 would be
graphics(3A) and graphics(3B).
56