HP Visualize c100 Service Handbook page 278

Boot Console Interface Model C160L/160/180/200/240/360
Updating System Firmware with ODE
The following commands may be entered at the
prompt:
UPDATE>
• help - prints a one line description of each of the
available commands in the update utility.
• info - prints information on how to use the update
utility.
• run - updates the PDC of the workstation from the
LIF directory.
• image - allows you to specify which LIF images to
use.
• expert - enables/disables exit pausing and run confir-
mation for expert users.
• exit - resets the workstation so the new PDC can run.
To run the update utility, type run at the
prompt. After update loads the new images into mem-
ory, it asks if you want to continue the update process,
and displays the PDC version of the currently running
PDC as well as that of the images that were loaded. If
you wish to continue, type y.
When the update process has completed, the machine
reboots automatically.
If you are using a graphics monitor for the updating pro-
cedure, characters may not be printed to the screen cor-
rectly because the character set for graphics printing is
stored in the machine ROM that is overwritten. We rec-
ommend that you use a terminal connected to the first
serial port, serial 1, for updating your workstation.
250
UPDATE>