Audio Connectors - HP Visualize c100 Service Handbook

Product Information
System Unit Rear Panel Connectors

Audio Connectors

The C Class workstations have audio input and output
capability through external input and output connec-
tors on the rear panel and through an internal speaker.
The rear panel contains the Line IN (Stereo line-in)
and Line OUT (Stereo line-out) connectors.
NOTICE: To maintain compliance with FCC/CISPR B you
must use fully shielded, unbalanced audio cables
and plugs.
The audio connectors are standard stereo audio mini-
jacks. Hewlett-Packard recommends using gold-plated
plugs available through audio retailers. The following
summarizes the capabilities of the C Class worksta-
tions:
•
•
16
Audio Features
Programmable sample rates:
8kHz, 16kHz, 32kHz, 48kHz,
11.025kHz, 22.05kHz, and 44.1kHz.
Programmable output attenuation:
0 to -96dB in -1.5dB steps
Programmable input gain:
0 to 22.5dB in 1.5dB steps.
Input monitoring:
16-bit linear, 8-bit u-law, or A-law coding
Audio Inputs
Line-in
Mono microphone compatible with 1.5V phantom
supply (bias voltage supplied by the system)
CD-ROM audio (if internal CD-ROM is installed)