HP Visualize c100 Service Handbook page 266

Boot Console Interface Model C160L/160/180/200/240/360
Setting the Auto Boot and Auto Search Flags
To change the state of the auto boot or auto search
flags, type the following at the prompt:
or
where state is on or off.
Autosearch searches for devices in the following
order:
NOTICE: Fast Wide SCSI adapter option cards installed in
the option slots are not searched unless they are
referenced by the primary or alternate boot paths.
EISA cards are not searched.
238
auto boot state
auto search state
Primary Boot Path
Alternate Boot Path
Built-in Fast, Wide SCSI Devices
Built-in Single-Ended SCSI Devices
Built-in LAN bootp servers