Before Commissioning; Proper Use; Operators, Maintenance Personnel; Setup Regulations - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Before commissioning

Proper use

The cleaning device is to be used exclusively for cleaning Fronius robot welding
torches, especially the gas nozzle and its interior, in automatic mode and within
the scope of the technical data. Any use above and beyond this purpose is
deemed improper. The manufacturer shall not be held liable for any damage
arising from such usage.
Proper use includes:
-
-
-
Operators, main-
tenance person-
nel
Risk of machines starting automatically.
This can result in serious injury and damage to property.
▶
▶
Setup regula-
The cleaning device is tested to protection class IP 20, meaning:
tions -
-
The device must not be set up and operated outdoors. The built in electrical
parts must be protected from direct wetting.
Danger from machines falling or toppling over.
This can result in serious injury and damage to property.
▶
Compressed air
To ensure that the cleaning device functions correctly, the following compressed
supply specifica- air supply specifications must be met:
tions -
-
36
carefully reading these operating instructions
following all the instructions and safety rules in these operating instructions
performing all stipulated inspection and maintenance work
WARNING!
The device must only be used by 1 person at a time. It is also necessary to
ensure that no one else is within the working area of the device when the
device is being used.
The device must only be serviced by 1 person at a time. It is also necessary to
ensure that no one else is within the working area of the device when the
device is being serviced.
Protection against penetration by solid foreign bodies with diameters > 12.5
mm (0.49 in.)
No protection against the ingress of water
WARNING!
Always secure the cleaning device to the underlying surface.
Establish compressed air supply using a pressure limiter and compressed air
filter
Provide compressed air quality conforming to ISO 8573-1:2001, class 7 4 3,
instrument air
-
Solid particle concentration £ 10 mg/m
Vapour pressure dew point £ + 3°C
-
-
Oil concentration £ 1 mg/m
3
3