Installing Mechanically-Controlled Wire Cutter On The Robacta Reamer Alu Edition And; Installing The Mechanically-Controlled Wire Cutter - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Installing mechanically-controlled wire cutter on
the Robacta Reamer Alu Edition and Robacta
Reamer Alu 3000upm (optional)
Installing the
NOTE!
mechanically-
Installation of the wire cutter is shown for the Robacta Reamer Alu Edition.
controlled wire
cutter The wire cutter is installed in exactly the same way on the Robacta Reamer Alu
3000upm.
(3)
(2)
1
2
1
2
Position the mounting bracket (1)
1
(1) on the wire cutter (2) as shown and
screw into place as described - us-
ing the fixings supplied
Undo 3 screws and washers (3)
2
(3)
Remove cleaning device housing
3
cover (4)
(4)
(3)
51