Proper Use; Environmental Conditions; Obligations Of The Operator; Obligations Of Personnel - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Proper use

The device is to be used exclusively for its intended purpose.
The device is intended solely for the mechanical cleaning of Fronius robot weld-
ing torches in automatic mode.
Any use above and beyond this purpose is deemed improper. The manufacturer
shall not be held liable for any damage arising from such usage.
Proper use includes:
-
-
-
The device is designed for use in industry and the workshop. The manufacturer
accepts no responsibility for any damage caused through use in a domestic set-
ting.
The manufacturer likewise accepts no liability for inadequate or incorrect results.
Environmental Operation or storage of the device outside the stipulated area will be deemed as
conditions
not in accordance with the intended purpose. The manufacturer shall not be held
liable for any damage arising from such usage.
Ambient temperature range:
-
-
Relative humidity:
-
-
Keep ambient air free from dust, acids, corrosive gases and substances, etc.
Can be used at altitudes of up to 2000 m (6500 ft)
Obligations of
The operator must only allow persons to work with the device who:
the operator -
-
-
Checks must be carried out at regular intervals to ensure that operators are
working in a safety-conscious manner.
Obligations of Before using the device, all persons instructed to do so undertake:
personnel -
-
Before leaving the workplace, ensure that people or property cannot come to any
harm in your absence.

Specific hazards

carefully reading these operating instructions
following all the instructions and safety rules in these operating instructions
performing all stipulated inspection and maintenance work
during operation: 0 °C to + 40 °C (32 °F to 104 °F)
during transport and storage: -25 °C to +55 °C (-13 °F to 131 °F)
up to 50 % at 40 °C (104 °F)
up to 90 % at 20 °C (68 °F)
are familiar with the fundamental instructions regarding safety at work and
accident prevention and have been instructed in how to use the device
have read and understood these operating instructions, especially the sec-
tion "safety rules", and have confirmed as much with their signatures
are trained to produce the required results.
to observe the basic instructions regarding safety at work and accident pre-
vention
to read these operating instructions, especially the "Safety rules" section and
sign to confirm that they have understood them and will follow them.
7