Table of Contents
Advertisement
Before commissioning
Safety
Danger from incorrect operation and work that is not carried out properly.
This can result in serious personal injury and damage to property.
▶
▶
▶
Proper use
The power source is intended exclusively for MMA welding and TIG welding in
conjunction with system components from Fronius.
Utilisation for any other purpose, or in any other manner, shall be deemed to be
not in accordance with the intended purpose.
The manufacturer shall not be held liable for any damages arising from such us-
age.
Proper use also includes:
-
-
-
Setup regula-
tions
Danger from machines toppling over or falling.
This can result in serious personal injury and damage to property.
▶
▶
The device is tested to IP 23 protection, meaning:
-
-
Cooling air
The device must be set up in such a way that cooling air can flow freely through
the slots in the front and rear panels.
Dust
Ensure that metallic dust is not sucked into the system by the fan, when carrying
out grinding for example.
Outdoor operation
The device can be set up and operated outdoors in accordance with IP23 degree
of protection. Avoid direct wetting (e.g. from rain).
20
WARNING!
All the work and functions described in this document must only be carried
out by technically trained and qualified personnel.
Read and understand this document in full.
Read and understand all safety rules and user documentation for this device
and all system components.
carefully reading these operating instructions
following all the instructions and safety rules in these operating instructions
performing all stipulated inspection and maintenance work
WARNING!
Set up the device securely on an even, solid surface.
Check all screw connections are tightly fastened after installation.
Protection against penetration by solid foreign bodies with diameters > 12.5
mm (0.49 in.)
Protected against spraywater at any angle up to 60° to the vertical
Advertisement
Table of Contents
