Fitting The Cleaning Brush On The Robacta Reamer Alu Edition; Fitting The Cleaning Brush - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Fitting the cleaning brush on the Robacta Reamer
Alu Edition
Fitting the
cleaning brush
A cleaning brush that has become very hot through use can cause severe burns.
Before handling the cleaning brush, allow cleaning brush to cool to room temper-
ature (+25°C, +77 °F).
NOTE!
Only use the device manufacturer's contact tips, gas nozzles and cleaning
brushes.
If other manufacturers' products are used, trouble-free operation of the device
cannot be guaranteed. The manufacturer accepts no liability for damage result-
ing from the use of other manufacturers' contact tips, gas nozzles or cleaning
brushes.
NOTE!
The cleaning brush and adapter are not included in the scope of supply.
Consult the device manufacturer's spare parts list for the appropriate cleaning
brush.
1
2
3
CAUTION!
Remove the protective covering from the cleaning device
Fit the protective covering to the cleaning device in its original position
43