Before Commissioning - Fronius TC-1000 Operating Instructions Manual

Before commissioning

Safety
Set-up regulati-
ons
The Autotrafo TC-1000 is tested according to „Degree of Protection IP 21", meaning:
-
-
The device must not be set up and operated outdoors. The built in electrical parts must
be protected from direct wetting.
Mains connection The equipment is designed to run on the mains voltage given on the rating plate. If your
version of the machine does not come with the mains cables and plugs ready-fitted,
these must be fitted in accordance with your national regulations and standards. For
details of fuse protection of the mains supply lead, please see the Technical Data.
Commissioning
Safety
Warning! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described here until you have read and
completely understood all of the following documents:
- these Operating Instructions
- all operating instructions for the system components, especially the "Safety
rules"
Warning! A machine that topples over or falls from its stand can easily kill
someone. Place equipment on an even, firm floor and ensure it remains stable.
protected against ingress of solid bodies with diameters greater than 12.5 mm (.49 in.)
Protection against vertically falling drops of water
Note: Inadequately dimensioned electrical installations can lead to serious
damage. The mains supply lead, and its fuse protection, must be dimensioned
accordingly. The technical data shown on the rating plate shall apply.
Warning! An electric shock can be fatal. If the machine is plugged into the
mains electricity supply during installation, there is a high risk of very serious
injury and damage. Only carry out work on the machine when
- the mains switch is in the "O" position,
- the machine is unplugged from the mains.
3