Safety - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Safety

Safety Observe the following safety rules for all work described in the "Troubleshooting"
section.
Incorrect operation or shoddy workmanship can cause serious injury or damage.
All activities described in these operating instructions may only be carried out by
trained and qualified personnel. All functions described in these operating in-
structions may only be used by trained and qualified personnel. Do not carry out
any of the work or use any of the functions described until you have fully read
and understood the following documents:
▶
▶
Machines that start up automatically can cause serious injury and damage.
In addition to these operating instructions, the safety rules issued by the manu-
facturers of the robot and welding systems must also be observed. For your per-
sonal safety, ensure that all protective measures have been taken and will remain
in place while you are in the working area of the robot.
Risk of serious injury from:
▶
▶
▶
▶
▶
▶
WARNING!
these operating instructions
all the operating instructions for the system components, especially the
safety rules
WARNING!
WARNING!
mechanically powered parts
flying parts (shavings, etc.)
compressed air/parting agent mixture escaping from the parting-agent injec-
tion nozzles
Before performing work on the cleaning device or any connected system
components:
disconnect the customer compressed air and power supplies from the clean-
ing device and the connected system components, and ensure that they re-
main disconnected until work is complete
ensure that the cleaning device is depressurised - please see the "Ensuring
that the cleaning device is depressurised" section below for the relevant in-
structions
75