Screwing the cleaning device to the underlying
surface
Screwing the
cleaning device
and installation
Danger from machines falling or toppling over.
stand to the un-
This can result in serious injury and damage to property.
▶
derlying surface
▶
▶
Screw on the cleaning device and the spatter tray retainer using the fixings sup-
plied with the cleaning device.
3
Place components on the installation stand and secure
38
WARNING!
Always secure the installation stand to the underlying surface.
The screws for fastening the installation stand are not included in the scope
of supply of the installation stand. The installer is responsible for selecting
the right type of screws or bolts.
Always secure the cleaning device to the installation stand.
Place the optionally available in-
1
stallation stand on a level, firm and
vibration-free surface (foundation)
-
Position the installation stand
in such a way that the distance
the robot has to travel to the
cleaning device on the installa-
tion stand is as short as pos-
sible
Tightly screw the installation stand
2
to the surface (foundation) using
the selected mounting materials