Control Elements, Connections And Mechanical Components Of The Robacta Reamer Alu Edi; Control Elements, Connections And Mechanical Components - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Control elements, connections and mechanical
components of the Robacta Reamer Alu Edition
and Robacta Reamer Alu 3000upm
Control ele-
ments, connec-
tions and mech-
anical compon-
ents
Side view
(1)
(2)
Risk of damage to Harting Han6P connection (X1) supply due to overcurrent.
Secure supply against overcurrent with a 500 mA slow-blow fuse.
(3)
(4)
(5)
(6)
(7)
26
Compressed air connection
for a dry compressed air supply at 6 bar (86.99 psi)
Thread identification compressed air connection: G ¼"
Harting Han6P connection socket (X1)
for a + 24 V DC supply
CAUTION!
"Cleaning" screw
for manually checking the following functions:
- Cleaning motor ON/OFF
- Lifting device UP/DOWN
- Gas nozzle clamping device extending/retracting
Gas nozzle clamping device
holds the gas nozzle in place during cleaning
Protective covering
Cleaning motor
drives the cleaning brush / cleaning cutter
Lifting device
lifts the cleaning motor and the cleaning brush / cleaning cutter to the
cleaning position ready to commence cleaning
(4)
(5)
(3)
(6)
(7)
(1)
(2)
Front view