Installing The Electrically-Controlled Wire Cutter On The Robacta Reamer Alu Edition And; Installing The Electrically-Controlled Wire Cutter - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Installing the electrically-controlled wire cutter

on the Robacta Reamer Alu Edition and Robacta
Reamer Alu 3000upm (optional)
Installing the
NOTE!
electrically-con-
Installation of the wire cutter is shown for the Robacta Reamer Alu Edition.
trolled wire cut-
ter The wire cutter is installed in exactly the same way on the Robacta Reamer Alu
3000upm.
(3)
(2)
1
2
1
2
Position the mounting bracket (1)
1
(1) on the wire cutter (2) as shown and
screw into place as described - us-
ing the fixings supplied
Undo 3 screws and washers (3)
2
(3)
Remove cleaning device housing
3
cover (4)
(4)
(3)
55