Protecting Yourself And Others; Emc Device Classifications - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Stay out of the working area of the robot.
The device must be incorporated into a higher-level safety system within a se-
cured area.
If this area has to be accessed when setup and maintenance work is carried out,
make sure that
-
-
If untrained operators have access to the device, its compressed air supply must
be disconnected for the duration of work in accordance with "Performance Level
d" of the ISO 13849-1 standard.
In addition to these operating instructions, the safety rules issued by the robot
manufacturer must also be observed.
Keep your body, especially your hands, face, hair, clothing and all tools away from
moving parts, such as:
-
-
-
-
Do not touch cleaning cutter / cleaning brush immediately after use - risk of
burns. Observe the special safety rules in the operating instructions for handling
the cleaning cutter / cleaning brush.
Protect hands, face and eyes against flying parts (shavings, etc.) and compressed
air/parting agent mixture escaping from the parting-agent injection nozzles.
Covers may only be opened/removed for the duration of any maintenance, in-
stallation or repair work.
During operation
-
-
Protecting your-
When welding, you expose yourself to numerous dangers. In addition to these
self and others operating instructions, the safety rules of the manufacturer of the entire welding
system must also be observed.
Keep all persons, especially children, out of the working area while any devices
are in operation or welding is in progress. If, however, there are people in the vi-
cinity,
-
-
-
EMC Device
Devices in emission class A:
Classifications -
-
8
the entire system is switched off for the duration of the work in this area
and that it is prevented from starting up accidentally, e.g. as the result of a
control fault.
rotating cleaning cutter / rotating cleaning brushes
lifting device moving up/down
extending/retracting gas nozzle clamping device
wire cutter
Ensure that all covers are closed and fitted properly
Keep all covers closed
make them aware of all the dangers and health risks (crushing from mechan-
ically-powered parts, injury from cleaning cutter / cleaning brush, flying
shavings and similar matter, escaping compressed air/parting agent mixture,
flying sparks, dazzling by arc, inhaling of harmful welding fumes, noise, pos-
sible danger from mains or welding current, etc),
provide suitable protective equipment or
erect suitable safety screens/curtains.
Are only designed for use in industrial settings
Can cause line-bound and radiated interference in other areas