Screwing The Cleaning Device To The Underlying Surface - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

4
Attach the spatter tray retainer as shown
Screwing the
cleaning device
to the underlying
Danger from machines falling or toppling over.
surface
This can result in serious injury and damage to property.
▶
▶
▶
1
2
Place components on the underlying surface and secure
WARNING!
Always secure the cleaning device to the underlying surface.
If the underlying surface thickness is less than 5 mm (0.197 in.), use the fix-
ings supplied with the cleaning device for fastening.
If the underlying surface thickness is greater than 5 mm (0.197 in.), do not
use the fixings supplied for fastening. In this situation the installer is re-
sponsible for selecting the right type of fixing.
Place the cleaning device and the spatter tray retainer on a level, firm and vi-
bration-free surface (foundation).
- Position the cleaning device in such a way that the distance the robot has
to travel to the cleaning position is as short as possible.
39