Installing The Compressed Air Supply; Establishing The Compressed Air Supply For The Cleaning Device, Function Of The Com - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Installing the compressed air supply

Establishing the To establish the compressed air supply:
compressed air
1
supply for the
cleaning device,
function of the
2
compressed air
relief valve
3
The compressed air supply to the cleaning device can be broken and re-estab-
lished by moving the compressed air relief valve forwards and backwards - see
description below.
The diagram below shows the compressed air relief valve in the closed position =
no compressed air supply to the device:
Compressed air relief valve closed
The diagram below shows the compressed air relief valve in the open position =
compressed air is being supplied to the device:
Compressed air relief valve open
58
Depressurise the compressed air supply line of the cleaning device and en-
sure that it remains depressurised for the duration of the following work on
the device
Screw the supplied compressed air relief valve into the compressed air con-
nection on the cleaning device
Connect the compressed air supply line to the compressed air relief valve