Wire Cutter Function; Maximum Wire Diameter; How The Mechanically Controlled Wire Cutter Works; How The Electrically-Controlled Wire Cutter Works - Fronius Robacta Reamer Alu Edition Operating Instructions Manual

Wire cutter function

Maximum wire Wire electrodes with a diameter of up to 1.6 mm (0.063 in.) can be cut with an
diameter
electrically or mechanically-controlled wire cutter.
Two wire electrodes with a diameter of up to 1.6 mm (0.063 in.) can be cut in the
case of twin applications.
How the mech-
NOTE!
anically con-
trolled wire cut- If you change over to a new welding torch, the mechanically controlled wire cut-
ter must be reset!
ter works
How the elec- The electrically-controlled wire cutter opens and closes when there is an active
trically-con- signal from the robot control.
trolled wire cut-
ter works
If a torch body pushes the valve lever
(1) to the side by more than 15° with
the gas nozzle, the wire cutter is activ-
(1)
ated and the wire electrode is cut.
NOTE!
The wire electrode is cut while the
torch body is moving.
57