Checking The Repeater Input Signal - Icom IC-7610 Advanced Manual

2. ADVANCED OPERATIONS
FM repeater operation (Continued)
D Setting the repeater tone frequency (Continued)
Checking the repeater tone frequency
You can check the tone frequency by receiving the
repeater's input frequency using the tone scan. To
receive the input signals, the transceiver detects
the subaudible tone frequency using the tone scan
function.
1. Touch [T-SCAN].
• The scan starts, and then stops when the tone
frequency on the repeater is received.
Blinks while scanning
2. To close the TONE FREQUENCY screen, push
EXIT .
D Checking the repeater input signal
You can check whether you can directly receive
another station's transmit signal or not, by listening to
the repeater input frequency.
L While receiving, hold down
repeater input frequency.
L While listening, the TX/RX indicator lights green,
and then the Noise Reduction and Notch Filter
settings are cancelled.
Quick Split function ON
While holding
down .
XFC
34
XFC to listen the
XFC
Release .
XFC
Another station's transmit frequency