Split Frequency Operation; D Using The Quick Split Function; D Using The Receive And Transmit Frequencies Set To Vfo A And Vfo B - Icom IC-7300 Basic Manual

4
RECEIVING AND TRANSMITTING

Split frequency operation

Split frequency operation enables you to transmit
and receive on different frequencies in the same or
different bands.
Anotherstation
Transmit frequency
Receive frequency
D UsingtheQuickSplitfunction
The Quick Split function enables you to automatically
equalize the frequency and mode of VFOs to the
displayed VFO, and activate the Split function.
1. Set VFO A's receive frequency and operating
mode.
  (Example:21.29000MHzintheUSBmode)
2. Hold down for 1 second.
SPLIT
• The Quick Split function is turned ON and the VFO A
settingsaresettoVFOB.
•  T heVFOBfrequncyisdisplayedinthebottomright
corner of the main screen.
3. While holding down
frequency offset between transmit and receive.
The offset between transmit and receive
while holding down
USBmode
21.29000 MHz Receive frequency
USBmode
21.31000 MHz Transmit frequency
Displayed
VFOB
frequency is
displayed
XFC , set the operating
VFOB
.
XFC
There are 2 ways to use the Split frequency operation.
• Use the Quick Split function
• Use the receive and transmit frequencies set to VFO
AandVFOB.
Mystation
VFO A
VFO B
D  U singthereceiveandtransmit
frequenciessettoVFOAandVFOB
1. Set VFO A's receive frequency and operating
mode.
  (Example:21.29000MHzintheUSBmode)
2. Push toselectVFOB,andthensetthereceive
A/B
frequency and the operating mode.
  (Example:21.31000MHzintheUSBmode)
3. Push
SPLIT
L Pushing
4. Push
A/B
LThe Split frequency operation is ready.
4-10
to turn ON the Split function.
turns the Split function ON or OFF.
SPLIT
Displayed
to return to VFO A.
VFO A
frequency is
displayed