Memory List Screen; D Selecting A Memory Channel Using The Memory List Screen; D Confirming Programmed Memory Channels - Icom IC-7700 Instruction Manual

■ Memory list screen

D Selecting a memory channel using the memory list screen

ROLL MEMORY
F-1 F-4

• Memory list screen

D Confirming programmed memory channels

ROLL SET
F-1
Z Y
Main dial
EXIT/SET
WIDE
F-7
Main dial
EXIT/SET
F-2
The memory list screen simultaneously shows 9
memory channels and their programmed contents.
15 memory channels can be displayed in the wide
memory list screen.
You can select a desired memory channel from the
memory list screen.
q Push EXIT/SET
tion screen, if necessary.
w Push [MEMORY]
screen.
• [WIDE] switches the standard and wide screens.
F-7
e While pushing and holding [ROLL]
main dial to select the desired memory channel.
• ∫ and √ can also be used.
r Push EXIT/SET to exit memory list screen.
q Select memory list screen as described above.
w While pushing [ROLL]
scroll the screen.
e Push [SET]
F-2
channel, if desired.
• "u" appears beside the selected memory channel
number in the memory list screen and the selected
memory channel contents are displayed below the fre-
quency readout.
r Push EXIT/SET to exit memory list screen.
8-5
MEMORY OPERATION
several times to close a multi-func-
to select memor y list
F-4
F-1
, rotate the main dial to
F-1
to select the highlighted memory
8
, rotate the