Diagnostics And Special Settings; Enabling/Disabling The Timeclock; Enabling/Disabling The Backlighting; Diagnostics - Lutron Electronics QSGRJ-3P Installation And Operation Manual

Diagnostics and Special Settings

Enabling/Disabling the Timeclock

The timeclock can be enabled or disabled as desired.
1. Enter programming mode. Use the Master
Timeclock
buttons to select "Timeclock." Press the
"OK" button to accept.
Monday
Enabled
2. Use the Master buttons to highlight either
"Enabled" or "Disabled." Press the "OK"
button to accept. The info screen will
confirm that your setting has been saved.
3. Exit programming mode.
Saved

Enabling/Disabling the Backlighting

The backlighting on the info screen can be enabled or disabled as
desired.
1. Enter programming mode and select
Backlighting
"Backlighting." Press the "OK" button to
accept.
Monday
Enabled
2. Use the Master buttons to highlight either
"Enabled" or "Disabled." Press the "OK"
button to accept. The info screen will confirm
that your setting has been saved.
3. Exit programming mode.
Saved
®

Diagnostics

If you are having trouble with your control unit and call
LutronR Technical Support, you may be asked for
diagnostic information about your unit.
Diagnostics
Device SN
Link Info
Link info
GRAFIK Eye QS Control Unit Installation and Operation Guide 61
®
OK
1. Enter programming mode and
select "Diagnostics." Press the
"OK" button to accept.
2. Use the Master buttons to highlight
the option that will display the
required information. The info
screen can display the device serial
number, link information, code
version, or USB status. There is
also an option to reset the USB
connection (do this only if asked to
by LutronR Technical Support).
4. Exit programming mode.
Master
buttons
"OK"
button