Table of Contents
Advertisement
1
I
m
p
o
1
I
m
p
o
N
o
t
i
N
o
t
i
1.1
Safety Warnings
Customer equipment including personal computers, routers, etc., must be connected
only to the INPUT (DATA) port on the PoE unit.
Only the outdoors Ethernet interface cable connecting to the AN-80i can be safely
connected to the OUTPUT (DATA & POWER) connector. Connecting customer
premises Ethernet equipment directly to the OUTPUT (DATA & POWER) connector
on the Power-over-Ethernet power adapter may damage customer equipment.
Installation of the system must be contracted to a professional installer.
1.
Read this user manual and follow all operating and safety instructions.
2.
Keep all product information for future reference.
3.
The power requirements are indicated on the product-marking label. Do not exceed
4.
the described limits.
Use only a damp cloth for cleaning. Do not use liquid or aerosol cleaners. Disconnect
5.
the power before cleaning.
Disconnect power when unit is stored for long periods.
6.
The AN-80i must not be located near power lines or other electrical power circuits.
7.
The system must be properly grounded to protect against power surges and
8.
accumulated static electricity. It is the user's responsibility to install this device in
accordance with the local electrical codes: correct installation procedures for
grounding the AN-80i, mast, lead-in wire and discharge unit, location of discharge
unit, size of grounding conductors and connection requirements for grounding
electrodes.
70-00072-01-06a
r
t
a
n
t
S
a
r
t
a
n
t
S
a
c
e
s
c
e
s
PoE power adapter caution:
Warning to Service Personnel: 48 VDC
Proprietary Redline Communications © 2008
AN-80i
f
e
t
y
&
S
e
f
e
t
y
&
S
e
Page 8 of 96
User
Manual
Chapter
1
r
v
i
c
e
r
v
i
c
e
June 1, 2008
Advertisement
Table of Contents
