Table of Contents
Advertisement
4.4.3
Group Screen
Click
New Group
configuration defines how Ethernet packets are handled on the sector controller. A
Group
must be created for each VLAN to be transported across the wireless interface.
Group
Group
Group Name: Enter a name for this
displayed on configuration and statistics screens.
Group ID: (Read only) A unique
is created. The
Group Tagging Mode: Select the packet processing performed at the sector controller.
Packets are forwarded unicast (known address) or multicast (unknown address). Further
processing is performed at the subscriber based on the
Tagged: Select tagged to associate a unique VID with this
Packet received at sector controller Ethernet interface:
A packet with this VID has the matching (outermost only) VLAN tag removed. The
packet is forwarded over the wireless to all subscribers in this
Packet received at sector controller wireless interface (from subscriber):
The packet belonging to this
subscribers belonging to this
If the sector controller Ethernet port is enabled, a VLAN tag is added (outermost) and
set to the VID (
sector controller Ethernet Port.
Pass-through: Select pass-through to create a
not have a VLAN ID, or the outermost VLAN ID tag does not match the VLAN ID for
any
Group
70-00072-01-06a
in the left-hand menu to display a blank
Figure 25: PMP - Group Configuration Screen
ID number is required when associating
Group
Group
Group
VLAN ID field) for this
Group
. Only one pass-through
Proprietary Redline Communications © 2008
AN-80i
(15 characters max.). The
Group
ID is generated automatically when a new
Group
is forwarded unmodified over the wireless to all
.
and the packet is forwarded to the
Group
Group
can be defined for each sector controller. If
Group
Manual
configuration screen. The
Group
Group
to this
Connections
configuration.
Connection
.
Group
.
Group
to process all packets that do
Page 48 of 96
User
name is
Group
.
Group
June 1, 2008
Advertisement
Table of Contents
