Table of Contents
Advertisement
Packet received at subscriber Ethernet interface:
Each packet with this VID (
(outermost only) removed and is forwarded over the wireless interface to the sector
controller.
Packet received at subscriber wireless interface (from sector controller):
A VLAN tag is added (outermost) and set to the VID (
this
Connection
Pass-through: Select pass-through to create a
packets and packets where the outermost VLAN ID tag does not match the VID
(
Connection
can be defined for each subscriber. If a pass-through
untagged packets received at the subscriber Ethernet ingress port are discarded.
Packet received at subscriber Ethernet interface:
The packet is forwarded unmodified over the wireless to the sector controller.
Packet received at subscriber wireless interface (from sector controller):
The packet is forwarded unmodified to the subscriber Ethernet port.
Connection VLAN ID: Enter the VLAN ID tag associated with this
This field is used only when 'Tagged' is selected in the
Default priority: Enter the default 802.1p priority setting.
The default priority setting is used only when the
through' mode and the associated
Connection
the packet being forwarded.
Parent Link ID: Enter the
value created automatically when the subscriber
: Click this text (right side of screen) to display a list of existing
Links List
Parent Group ID: Enter the
value created automatically when the subscriber
: Click this text (right side of screen) to display a list of existing
Groups List
Wireless Traffic Parameters
The sector controller allocates bandwidth for all subscribers using the Weighted Round
Robin algorithm with the combined total of all QoS levels acting as weights. The
aggregate QoS settings affect packet delay and jitter values for the entire sector.
It is strongly recommended to calculate
80i PMP Configuration Tool -- the QoS levels for each
from the
QoS
these settings, identify the maximum UL and DL burst rate for the associated
calculate the highest available level using the formula:
DL QoS Level: Enter the QoS level for downlink unicast traffic for this connection.
UL QoS Level: Enter the QoS level for uplink unicast traffic for this connection.
70-00072-01-06a
Connection
. The packet is forwarded to the subscriber Ethernet port.
VLAN ID field) for with this
Default Priority value is used when adding the 802.1Q tag (
Link ID
Group ID
column in the
Connection ID Configuration
Proprietary Redline Communications © 2008
AN-80i
VLAN ID field) has the matching VLAN tag
Connection
Connection
. Only one pass-through
Connection
Group
Connection
Connection
Tagging Mode is set to 'Tagged'. The
Group
for this
. This is the unique identification
Connection
was added. See
Link
for this
. This is the unique identification
Connection
was added. See
Link
and
DL QoS
UL QoS
Connection
section. To manually determine
Burst Rate - 1
Page 51 of 96
User
Manual
VLAN ID field) for
to process all untagged
Connection
is not configured, all
definition.
Connection
Tagging Mode field.
Tagging is set to 'pass-
VLAN ID) to
Group
below.
Links List
.
Link IDs
below.
Groups List
Group IDs
levels using the Redline AN-
can be read directly
Link
.
June 1, 2008
.
and
Advertisement
Table of Contents
